Smart Stip by Peel Away® 1 Quart

Smart Stip by Peel Away® 1 Quart

 
Graffiti removal systems that work. Check out our full line of graffiti removers.
Graffiti Removers
Watch Dog Lift Away Graffiti Remover
Paint Removers
Grease And Oil Removers
Hand Cleaners
Mastic Remover
Email
(Required)
First Name
Last Name
Who are you?
   
   
 


Or E-mail Us
Customer Service Hours Monday-Friday
7:30a.m.-5:00p.m. CST

Frequently Asked Questions
Applications & Solutions
Site Map

Merchant Services

Secure Site
You can have complete confidence when ordering products through GraffitiRemover.com. All transactions are processed through state of the art secured technology.

Great Graffiti Removers, great prices
GraffitiRemover.com brings you a great selection of graffiti removers at prices that fit almost any budget. If you happen to find the same item at a lower price, contact us before you buy.

No sales tax at GraffitiRemover.com
Only orders shipped to Wisconsin are charged sales tax.


 
Smart Strip Paint Remover
 
 
Smart Stip by Peel Away® 1 Quart:
ID: SmartStrip1Quart
Price:
 $17.97

ORDER QUANTITY

 

Peel Away® Smart Strip - 1 Quart Paint Removal System "Sample Size"

- Click Here For MSDS

PRODUCT FEATURES:

  • Removes up to 15 layers of paint and industrial coatings in one application
  • Coverage for 1 Qt Size is 12.5 sq. ft.
  • User friendly, does not contain methylene chloride, caustic or toxic chemicals, will not burn hands
  • Water based formula
  • 100 % biodegradable
  • Odor free
  • Does not require neutralization
  • For interior and exterior use
Product Description:

A revolutionary paint remover that is safe for the user, the substrate and the environment. This 100% biodegradable, water-based stripper is extremely effective for removing multiple layers of architectural and industrial coatings from virtually all interior/exterior surfaces - wood, brick, metal, concrete, stone, plaster, fiberglass, etc. Smart Strip does not contain methylene chloride, caustic, or toxic chemicals. It is odor free. Smart Strip is exceptional for the safe removal of lead based paint and is excellent for intricate, carved or molded surfaces. It is also great for removing marine paints without damaging the gel coat. Because it is a paste, Smart Strip can easily be applied by brush, roller or conventional airless sprayer. It is formulated to remain wet and effective over extended periods of time and does not require the use of Peel Away® Paper. Although the use of Peel Away® Paper will accelerate the removal process and extend dwell time. Peel Away® Paper can be purchased separately.

USE ON:

Works on almost all surfaces, wood, brick, concrete, plaster, steel, iron, fiberglass, etc. Easily adheres to vertical or overhang surface. Can be used on interior and exterior surfaces.

EASY TO APPLY:

Limitations: For best results, surface temperatures should be 60ºF – 95ºF. Product can be applied as low as 37ºF, however, efficiency/effectiveness are reduced and dwell time increases.

Test Patch: Always prepare a test area on each type of surface and paint coating prior to full application. Testing before beginning the project is the best way to ensure product suitability. This will also determine the proper thickness of the remover and the dwell time required for project completion.

Preparation: Mask/protect areas where stripping is not desired, including adjoining surfaces where overspray may travel. Polyethylene (plastic sheets) and masking tape create an effective barrier. Plants and other foliage should be covered or rinsed thoroughly before and during application.

NOTE: SMART STRIP™ will not affect glass, aluminum, or plastic surfaces.

Application & Spread Rate: Using brush, roller or airless spray, apply approximately 1/6” to 1/8” thick (refer to test patch results) according to the age, number of layers, and type of coating being removed. SMART STRIP™ provides an average spread rate of 45 - 50 sq. ft. per gallon; results may vary.

Removal: Remove softened/lifted paint using a scraper, taping knife, squeegee or power washer. Agitate tough to remove residue with a stiff nylon brush or scouring pad, paying particular attention to crevices, grooves and cracks. Exterior stripped surfaces should be rinsed thoroughly with a power washer. Interior surfaces can be rinsed using a spray bottle or pail, a sponge and water, or denatured alcohol to remove remaining residue.

Clean Up: Collect remover, paste and paint residue in plastic bags and dispose of in compli-ance with local government regulations. Do not collect or store removed paint/paste waste in metal containers. Clean up airless sprayer by running water or denatured alcohol through the equipment soon after application has been completed. Allow surface to dry thoroughly before repainting.

Accelerate the Paint Removal Process with our EXCLUSIVE technologically advanced fibrous Paint Removal Paper with NO additional postage or shipping charges. Click Here For Details

 

 

*No Sales Tax Except for the sTate of Wisconsin - Order ONline or call us 866-598-2128
International orders please call (920) 968-0539
Paint Removal, LLC PO Box 7066 Appleton WI 54912



Copyright © 2009 Paint Removal LLC All Rights Reserved
Paintremoval.com is not responsible for typographical or photographic errors. Prices and specifications
are subject to change without notice.