3 gallons Retail Value 104.95
No job is too tough for Safe n' Easy™ INDUSTRIAL STRENGTH Oil and Grease remover.
Stock up now and Save $13.90
Safe N Easy Oil / Grease Remover - 3 Gallons
Product Features
•Cleans motor oil, grease and heavy soils from concrete and asphalt surfaces
•Non-Toxic, Non-Abrasive & Non-Flammable
•Cleans without scrubbing
•300/375 Sq. Ft per 3 gallons
•Apply, wait and rinse.
•Nothing is easier!!
Before and After
Oil Stain on cement floor
before applying Safe N Easy
Oil & Grease Remover.
|
Safe & Easy was applied
to the oil stain on the
cement floor. |
Cement floor after using
Safe & Easy Oil & Grease
Remover. |
Safe n' Easy Oil/Grease Cleaner is a highly concentrated, biodegradable cleaning
product and has specifically been formulated to clean motor oil, grease and
heavy soils from concrete and asphalt surfaces. This product can also be used
to clean walkways, barbecue grills, lawn and playground equipment and a variety
of other surfaces. Safe n' Easy Oil/Grease Remover has been engineered to actually
penetrate beneath the surface into porous concrete, asphalt and masonry surfaces.
It does not sit on top of surfaces like other cleaners. Usual dwell time is
three hours and it can then be either pressure washed or hosed off. No scrubbing
is required.
General Application:
Apply product liberally by spraying or brushing it onto the surface being cleaned.
DO NOT DILUTE. If it is being applied to porous concrete/asphalt surfaces, allow
the product to remain on the surface for approximately three (3) hours. This
gives it time to penetrate which will then allow the oil/grease to literally
be driven up and out of the surface when either power washed or hosed off with
water. If the product is being used to clean sealed surfaces then the dwell
time could only be 15-30 minutes and this would be determined by doing test
areas. NO scrubbing of the treated surface is necessary.
